ALL BULLETS ARE MADE IN HOUSE AT OUR FACTORY IN WA AND ARE COATED USING HI-TEK -LUBE SUPER COAT
DISCLAIMER: The data given here is only a guide based on experience and equipment. Lead weight may vary from batch to batch.
X Ring Ammo will not be held responsible for any injuries to any person or persons or damage to property due to negligent use of the firearm and faulty equipment used in the manufacture of ammunition for recreational or competition use.
.32 Button Nose Wadcutter 100 grain $50/500
Gas checked base. Can be sized to .312, .314
9mm/.38 Flat Nose Conical - 121 grain $50/500
Gas checked base to help alignment when seating.
Can be sized to .355, .356, .357. Suitable for Auto or Revolver when sized to suit. No grease grooves so can be crimped anywhere.
9mm/.38 Semi Wadcutter - 100 grain $50/500
Can be sized to .355, .356 for Auto's or .357 for Revolvers
Ideal for light loads in 9mm/.38 Super. Suitable for Service Unrestricted, 25 Service, WA 1500 or any match without "Power Factors". Can also be deep seated. Very accurate out to 50metres.
.38 Semi Wadcutter - 150 grain $60/500
Generally sized to .357.
Ideal for service revolvers. With no grease grooves, these projectiles can be seated out to meet the throat of the cylinder which often enhances accuracy.
.38 Wadcutter - 105 grain $50/500
Generally sized to .357.
Ideal for deep seating on .38/.357 cases. Suitable for Service Unrestricted, 25 Service, WA 1500 or Mandar/Revolver match.
9mm/.38 Round Nose Conical - 125 grain $50/500
Can be sized to .355, .356, .357.
Suitable for 9mm/.38 Super or .38/.357 where fast reloads are required.
.40 Cal Flat Nose Conical - 180 grain $65/500
for Law Enforcement or Silhouette shooters
9mm/.38 Round Nose Semi Wadcutter - 125 grain $50/500
Can be sized to .355, .356 for Auto's or .357 for Revolvers.
Gas checked base.
Make a free website with Yola